These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2″ thick and you can fit these in place, there’s even a rubber gasket to keep water out of the enclosure. On the front of the button is a flat metal actuator, surrounded by a white plastic LED ring. On the back there are 3 contacts for the button (common, normally-open and normally-closed) and 2 for the white LED ring (+ and -). Connect 3 to 6V to the LED to have it light up nicely, there’s a built in resistor! If you want to use this with a higher voltage, say 12V or 24V, simply add a 470 ohm resistor in series with the LED connection to keep the LED current at around 20mA.
This button is an on/off switch button, when you press it the ‘normally-open’ contact shorts to the common contact and the button stays ‘pressed’. When you press it a second time, the button springs open, and the contacts open up again.
The switch and LED are separated, so you could wire it to turn on when pressed or vice versa or whatever you wish! Check the tech details for information!
Technical Details
- Drill hole diameter: 16mm
- Switch rating: 3A / 250VDC
- Switch contacts: 1 NO, 1 NC
- Material: Chrome-plated brass
- Contact resistance: < 50 mOhm
- Insulation resistance: > 1000 Mohm
- Temperature: -20 C to +55 C
- Mechanical life: > 500,000
- Electrical life: > 50,000
- Panel thickness: 1-13mm
- Operating pressure: 1.5 – 2.5 N
- Operating stroke: 2mm
- Lamp rated voltage: 6V
Fast Shipping and Professional Packing
We offer a broad range of shipping options due to our long-standing partnerships with UPS, FedEx and DHL. Our warehouse staff is highly trained and will pack the goods according to our precise and exact specifications. Before shipping, all goods will be thoroughly examined and securely secured. We deliver to hundreds of thousands of customers every day in different countries. The fact that we are determined to become the largest online retailer in the world is evident. Warehouses and distribution centres can be located in Europe as well as the USA.
Note: Orders with more than one item will be assigned a separate processing time for each item.
Before shipment, all ordered items will be thoroughly examined. Most orders are now shipped within 48 hrs. Delivery is expected to take between 3 and seven days.
Returns
Stock is dynamic, and cannot be fully controlled by us because of the involvement of multiple parties including the factory and our warehouse. This means that the actual stock could alter at any time. It's possible that the stocks could be depleted after your order has been processed.
The policy is for 30 days. Unfortunately, if 30 days have passed from the date you purchased the item, we will not be able to provide a refund or exchange.
The item must not be in use and must be in the original packaging. You must have the item in the original packaging.
Related products
Components & Parts
Components & Parts
Components & Parts
Components & Parts
Components & Parts
Components & Parts
5.0V 250mA Linear Voltage Regulator – L4931-5.0 TO-92 Adafruit
Components & Parts
Components & Parts
Components & Parts
Components & Parts
Components & Parts
3.5mm (1/8″) Stereo DIY “Free-Hanging” In-Line Jack Adafruit
Components & Parts
Components & Parts
2mm Pitch 40-Pin Break-apart Male Headers – Pack of 5 Adafruit
Components & Parts
Components & Parts
Components & Parts
Components & Parts
0.1″ 36-pin Strip Right-Angle Female/Socket Header (5 pack) Adafruit
Components & Parts
Components & Parts
Components & Parts
16mm Illuminated Pushbutton – Yellow Latching On/Off Switch Adafruit
Components & Parts
Components & Parts
3.3V 800mA Linear Voltage Regulator – LD1117-3.3 TO-220 Adafruit
Components & Parts
16mm Illuminated Pushbutton – White Latching On/Off Switch Adafruit
Components & Parts
Components & Parts
Components & Parts
Components & Parts
Components & Parts
Components & Parts
Components & Parts
Components & Parts
Components & Parts