LEDs and passives and transistors and switches oh my! The Adafruit Parts Pal is the ultimate companion for an entry-level maker learning electronics. This kit is your friend whenever you need to build up a project. It contains many of our most popular components and prototyping parts all wrapped up in one parts pack so you can open up and dig right in.
Kit Contents:
Prototyping:
- 1x – Storage box with latch
- 1x – Half-size breadboard
- 20x – Male/male jumper wires – 3″ (75mm)
- 10x – Male/male jumper wires – 6″ (150mm)
LEDs:
- 5x – 5mm Diffused green LEDs
- 5x – 5mm Diffused red LEDs
- 1x – 10mm Diffused Common-Anode RGB LED
Capacitors:
- 10x – 1.0uF Ceramic capacitors
- 10x – 0.1uF Ceramic capacitors
- 10x – 0.01uF Ceramic capacitors
- 5x – 10uF 50V Electrolytic capacitors
- 5x – 100uF 16V Electrolytic capacitors
Resistors:
- 10x – 560 ohm 5% axial resistors
- 10x – 1K ohm 5% axial resistors
- 10x – 10K ohm 5% axial resistors
- 10x – 47K ohm 5% axial resistors
Semiconductors:
- 5x – 1N4001 Diodes
- 5x – 1N4148 Signal Diodes
- 5x – NPN Transistor PN2222 TO-92
- 5x – PNP Transistor PN2907 TO-92
- 2x – 5V 1.5A Linear voltage regulator – 7805 TO-220
- 1x – 3.3V 800mA Linear voltage regulator – LD1117-3.3 TO-220
- 1x – TLC555 wide-voltage range, low-power 555 Timer
Sensors:
- 1x – Photocell
- 1x – Thermistor (Breadboard version)
- 1x – Vibration sensor switch
- 1x – 10K Breadboard trim potentiometer
- 1x – 1K Breadboard trim potentiometer
Mechanical:
- 1x – Piezo buzzer
- 5x – 6mm Tactile switches
- 3x – SPDT slide switches
- 1x – 40-pin Break-away male header strip
- 1x – 40-pin female header strip
Technical Details
Revision history
- As of July 20, 2016 we now include an LM358 dual opamp!
Datasheets:
- TLC555
- LM358
- PN2222A
- MPS2907A
- LD1117
- L7805CV
- Eletrolytic Capacitor
- Thermistor
- Resistance at 25 degrees C: 10K +- 1%
- B25/50 = 3950+- 1%
- Thermal time constant <= 15 seconds
- Thermistor temperature range -55 °C to 125 °C