A switch is a switch, and an LED is an LED, but this LED illuminated button is a lovely combination of both! It’s a medium sized button, large enough to press easily but not too big that it gets in the way of your project panel. It has a built in LED that can be controlled separately from the switch action – either to indicate or just to look good.
The body is a black plastic with the LED built inside. There are two contacts for the button and two contacts for the LED, one marked + and one -. The forward voltage of the LED is about 2.2V so connect a 220 to 1000 ohm resistor in series just as you would with any other LED to your 3V or higher power supply.
This particular button has a green body and LED and is latching on/off. The two switch contacts are either connected or disconnected. When you push the button they will switch from one to the other, like an on-off switch. The LED is separated from the button, so you can make it light up when on, light up when off, always lit, etc.
Technical Details
- Max Dimensions: 18.06mm / 0.7″ x 18mm / 0.7″ x 29.4mm / 1.15″
- Shaft Dimensions: 14.89mm / 0.58″ x 15.56mm / 0.6″ x 18.7mm / 0.73″
- Button Height: 5mm / 0.2″
- Button Height Depressed: 3.5mm / 0.15″
- Weight: 4.6g
Fast Shipping and Professional Packing
We offer a broad range of shipping options due to our long-standing partnerships with UPS, FedEx and DHL. Our warehouse staff is highly trained and will pack the goods according to our precise and exact specifications. Before shipping, all goods will be thoroughly examined and securely secured. We deliver to hundreds of thousands of customers every day in different countries. The fact that we are determined to become the largest online retailer in the world is evident. Warehouses and distribution centres can be located in Europe as well as the USA.
Note: Orders with more than one item will be assigned a separate processing time for each item.
Before shipment, all ordered items will be thoroughly examined. Most orders are now shipped within 48 hrs. Delivery is expected to take between 3 and seven days.
Returns
Stock is dynamic, and cannot be fully controlled by us because of the involvement of multiple parties including the factory and our warehouse. This means that the actual stock could alter at any time. It's possible that the stocks could be depleted after your order has been processed.
The policy is for 30 days. Unfortunately, if 30 days have passed from the date you purchased the item, we will not be able to provide a refund or exchange.
The item must not be in use and must be in the original packaging. You must have the item in the original packaging.
Related products
Components & Parts
Components & Parts
5.0V 250mA Linear Voltage Regulator – L4931-5.0 TO-92 Adafruit
Components & Parts
16mm Illuminated Pushbutton – White Latching On/Off Switch Adafruit
Components & Parts
Components & Parts
Components & Parts
Components & Parts
Components & Parts
Components & Parts
Components & Parts
3.3V 800mA Linear Voltage Regulator – LD1117-3.3 TO-220 Adafruit
Components & Parts
Components & Parts
Components & Parts
Components & Parts
Components & Parts
Components & Parts
Components & Parts
0.1″ 36-pin Strip Right-Angle Female/Socket Header (5 pack) Adafruit
Components & Parts
Components & Parts
Components & Parts
Components & Parts
3.5mm (1/8″) Stereo DIY “Free-Hanging” In-Line Jack Adafruit
Components & Parts
Components & Parts
36-pin 0.1″ Short Break-away Male Header – Pack of 10 Adafruit
Components & Parts
16mm Illuminated Pushbutton – Yellow Latching On/Off Switch Adafruit
Components & Parts
Components & Parts
Components & Parts
16mm Illuminated Pushbutton – Blue Latching On/Off Switch Adafruit
Components & Parts
Components & Parts
16mm Illuminated Pushbutton – Red Latching On/Off Switch Adafruit
Components & Parts
Components & Parts
0.1″ 2×36-pin Strip Straight Socket (Female) Header (5 pack) Adafruit
Components & Parts