This is a blank 13.56MHz RFID/NFC sticker – often used for inventory uses but also wherever a sticker is desired. The tag contains a small RFID chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away.
These can be read by almost any 13.56MHz RFID/NFC reader but make sure it can handle ISO/IEC 14443 Type A cards as there are a few other encoding standards (like FeLica) They are tested and work great with both our PN532 NFC/RFID breakout board and Adafruit NFC/RFID Shield for Arduino!
These chips can be written to & store up to 1 KB of data in writable EEPROM divided into banks, and can handle over 100,000 re-writes. You can use our PN532 NFC/RFID breakout board or Adafruit NFC/RFID Shield for Arduino to read and write data to the EEPROM inside the tag. There is also a permanent 4-byte ID burned into the chip that you can use to identify one tag from another – the ID number cannot be changed.
These use a ISO/IEC 14443 Type A chipset, which used to be the ‘classic’ NFC chipset. In ~2014, the NFC forum decided not to support this chipset anymore, so newer phones do not support it. This only matters if you’re trying to use this tag with a phone/tablet.
Technical Details
RFID chip specification:
- 1 KiloByte (8 KiloBit) non-volatile EEPROM storage
- Built in encryption engine with 48-bit key
- 4 Byte unique identifier burned into the chip
- 13.56 MHz frequency
Tag specification:
- 41mm x 24mm x 0.2mm / 1.6″ x 1″ x 0.008
- 0.3 grams / 0.01 oz
- Works about 2.5″ away from reader
Fast Shipping and Professional Packing
We offer a broad range of shipping options due to our long-standing partnerships with UPS, FedEx and DHL. Our warehouse staff is highly trained and will pack the goods according to our precise and exact specifications. Before shipping, all goods will be thoroughly examined and securely secured. We deliver to hundreds of thousands of customers every day in different countries. The fact that we are determined to become the largest online retailer in the world is evident. Warehouses and distribution centres can be located in Europe as well as the USA.
Note: Orders with more than one item will be assigned a separate processing time for each item.
Before shipment, all ordered items will be thoroughly examined. Most orders are now shipped within 48 hrs. Delivery is expected to take between 3 and seven days.
Returns
Stock is dynamic, and cannot be fully controlled by us because of the involvement of multiple parties including the factory and our warehouse. This means that the actual stock could alter at any time. It's possible that the stocks could be depleted after your order has been processed.
The policy is for 30 days. Unfortunately, if 30 days have passed from the date you purchased the item, we will not be able to provide a refund or exchange.
The item must not be in use and must be in the original packaging. You must have the item in the original packaging.
Related products
Prototyping > Wiring
Arduino > Data Logging
Buttons/Switches
Adafruit Fast Vibration Sensor Switch (Easy to trigger) Adafruit
Breakout Boards > Amplifiers/Sound
Adafruit Audio FX Mini Sound Board – WAV/OGG Trigger 16MB Flash Adafruit
Raspberry Pi > Camera
6mm Wide Angle Lens for Raspberry Pi HQ Camera CS Raspberry Pi
Arduino > Feather
Arduino > Shields
Adafruit 12 x Capacitive Touch Shield for Arduino – MPR121 Adafruit
Components & Parts
0.1″ 36-pin Strip Right-Angle Female/Socket Header (5 pack) Adafruit
Arduino > Feather
Audio > Sound Effects
Adafruit Audio FX Mini Sound Board – WAV/OGG Trigger – 2MB Flash Adafruit
Components & Parts
Arduino > Feather
Arduino > Display
Adafruit 2.4″ TFT LCD with Touchscreen Breakout w/MicroSD Socket – ILI9341 Adafruit
Arduino > Feather
Components & Parts
Raspberry Pi > Camera
16mm Telephoto Lens for Raspberry Pi HQ Camera CS Raspberry Pi
Prototyping > Wiring
Adafruit 2.1mm female/male barrel jack extension cable Adafruit